waste rubber recycling to tyre oil equipment with 8 MT/D of WJ-8 batch type

of

Waste tire pyrolysis machine, waste plastic pyrolysis machine, waste mineral oil distillation and refining plant, tire oil/ plastic oil distillation and refining device, pyrolysis carbonblack processing device, medical waste sterilization disposal devices;

contractor for MSW incineration and power generation plant.

the FIRST company in Chinese mainland got the

“Green Star” certificate

issued by the National Ministry of Environmental Protection,

the FIRST company got the

“High-tech Enterprises” in the industry.

in the year 2015, DonGHE successfully public listed on the NEEQ (the “Three New Board”) with the STOCK NAME of DonGHE ENVIRonMENTAL with

STOCK CODE 834961

Our Teams

The technical team ---- More than 20 years experienced pyrolysis engineers, and more than 35 years experienced waste mineral oil chief engineer.

Manufacturing team ---- Skilled manufacturing workers with 'QUALITY FIRST' production concept

Qc team ---- Strict quality inspection system and quality inspection personnel ensure the quality of each shipment

After-sales service team ----  always ready to go to project site to service for customers

Operation management team ---- Complete operation teams have served the customer projects on-site for many years

BUSINESS SCOPE

• Project Design, Machine Manufacture, Engineering Service, Technology Support
• Joint Venture Cooperation, Plant Leasing Business

Waste Tire Pyrolysis Machine

WJ-8 8~10 tons per day batch waste tire to fuel oil pyrolysis machinery

Waste tire pyrolysis machine is for converting waste tires/ waste plastics/ waste rubbers to get wire oil/ plastic oil and carbon black as main products, steel wires separated.

The new model WJ-8 batch waste tire Pyrolysis Machine allows whole waste tires or big tire pieces or packaged tires to be manual feeded, and machanical carbon discharging after the pyrolysis reactor cooling down enough. One batch per day, 8~10 tons per batch. 

---- RAW MATERIAL ----

Waste tires, waste rubber, waste plastics, oily solid, oily sludge, etc.

---- FINAL PRODUCTS ----

Fuel oil, carbon black, steel wires, combustible gas, etc.  

Processing Flow chart

WJ-8 Batch processing type Pyrolysis machine

Brief Description for the Processing Flow

•  FEEDING:  MANUAL FEEDING, OR IT CAN ALSO ConFIGURE WITH MACHANICAL FEEDING MACHINE
•  HEATING AND PYROLYSIS:  IN HORIZonTAL AND ROTATING REACTOR, INDIRECTLY HEATED BY HOT AIR
•  GAS CONDENSING:  EFFICIENT ConDENSING SYSTEM
•  DISCHARGING:  MACHANICAL CARBON DISCHARGING, STEEL WIRE SEPARATED 
•  EXHAUST GAS:  RECYCLING USED AFTER PURIFIED

3D Drawings for Reference

Technical Parameters

Part of our Patents

• Oil and Carbonblack Extracting machine
• Auto discharging device for pyrolysis system
• Discharging structure for pyrolysis system
• A kind of Heating Casing used for Horizental Rotable Pyrolysis Device
• A kind of anti-clogging Cooling system for waste plastic pyrolysis, etc.

CERTIFICATE

CASES 

FAQ ----

Q1: What kind of fuel will the plant need?

A: Any kinf of fuel you can use for the pyrolysis plant, like natural gas, diesel oil, the pyrolysis oil self produced, coal, wood, etc. Just tell our sales manager, so that we can arrange the right design for you accordingly.

Q2: How many labors will the whole processing need?

A: For batch processing type: 3~4 workers needed for each shift, two shifts in total (about 14~15 hours); for continuous processing type: 2~3 workers needed for each shift, three shifts in total (24hours).

Q3: Will it need to cut the waste tires before feeding?

A: For batch processing type pyrolysis machine, you’ll need not to cut the tires, but it will be better to cut into pieces, so as to feed in more tires in each batch. While for continuous processing type pyrolysis machine, you’ll need to cut the tires into little pieces like 50mm, or 8-10mm, more smaller, less steel wire, processing would be more efficient.

Q4: Will the steel wire need to be removed before feeding?

A: For continuous processing type, above 90% of steel wire to be removed would make sure of the pyrolysis processing efficient. While for the batch processing type, the main steel wire to be removed before feed in the pyrolysis reactor would get a better benefit for you.

Q5: How to make the oil yield higher?

A: Many factors would affect the oil yield. 1) Raw material: different tire sises would have a different oil yield, bigger tires would have a higher oil yield. 2) during the tires using and storage, oxidation degree would affect the oil yield of the material. 3) environmental temperature would influence temperature of the condensing water, which directly affect the oil yield, we can used a water condensing tower to keep the condensing water cool. 4) the pyrolysis plant operation would affect the condensing efficient, proper control of fire and heating would ensure efficient oil condensing and oil quality.

Q6: Will there be smell during the pyrolysis processing?

A: The entire processing is in sealed, no oil or gas is outlet, so there’s no smell during processing. But slight smell would produced during oil transfer.

Q7: How to clean the emission to meet environmental standard?

A: After purify, non condenced gas from the pyrolysis processing is transport to the burnning room to supply heating for the reactor. After full combustion, with the flue gas go to the three-stage dedusting system for clean, with water buthing, magnetic ring adsorbing, and spraying-desulphurization dedusting, the emission is mainly white water vapour, well meet most emission standards.  

Q8: How about your after-sales service?

A: We have experienced after-sales service engineers and staffs, who’s always ready to service for you. For technical questions, or problems you can firstly call us directly, our English speaking staffs would answer you well about your questions, and our engineers are ready to go to your site for technical service at any time.

For more questions, please feel free to

ConTACT US

Skype: wendy08282008

Mob.: 0086 186 2386 2620

Running project for visiting are available!

Visit us: Our factory is located in Shangqiu City, Henan Province, you can travel from Beijing or Shanghai, or any city of China to Shangqiu by High-speed train, or Flight to Zhengzhou city (CGO), then travel to Shangqiu city.

Please feel free to contact us for detailed information.

You may need following products: